Floor Standing Enclosure 600W x 1800H x 400D Single Door ETA ENUX Series - Free Standing Enclosure

$1,018.32

INC GST



Calculate Shipping


Side panels, mounting plate and plinth sold separately.

Supplied as flat packed.

Made in Italy

1. Removable roof and bottom to simplify glanding
2. Simple structure assembled with 8 screws only, thanks to the exclusive orthogonal joint made of special steel
3.  Sturdy structural uprights made of high-resistance materials with closed symmetric profile
4. Opening system with a unique lever mechanism, unique design and:

      3-point locking for H = 1400 and 1600
      4-point locking for H = 1800 and 2000
      5-point locking for H = 2200 with possibility to mount different inserts and convenient lock release system of the slave door of             the double door cabinet
5. Door with strengthening frame
6. Sturdy panels for high structural stiffness
7. Modular cable entry bottom with adjustable base plates and seal, consisting of one welded piece with box-type construction made of high resistance material
8. Front-inserted mounting plate, which can be recessed flush with the uprights thanksto the effective sliding guides system integrated in the bottom
9. Easy-to-assemble modular plinth EUZE
10. Possibility to adapt a fully modular walkable cable conduit
11. Wide range of complementary accessories
12. Wide range of sizes and unified structure for the configuration of automation cabinets, modular solutions, PC enclosures, control desks, 19” rack solutions, and telecom/ networking cabinets

CHARACTERISTICS/DELIVERY
The profile used for uprights and crosspieces is unique, manufactured from 12/10 high-resistance sheet steel, closed with continuous welding and free of sharp edges. The bottom is a single piece with boxtype structure made of press-bent welded profiles of 12/10 high-resistance sheet steel

The frame corners are manufactured with orthogonal joints laser welded to vertical upright rails and horizontal rails for the roof and bottom
Only 8 high resistance screws are necessary to mount the structure, while two position pins allow the easy mounting of the two parts of the joint.

SURFACE FINISH
• ETA standard epoxy polyester powder coating
• Structure: RAL 7035 smooth finish
• Door and rear panel: RAL 7035 textured finish
• Roof: RAL 7035 textured finish

ASSEMBLED E NUX CABINET (PR)
• Structure manufactured from 12/10 high-resistance sheet steel
• Door manufactured from 20/10 sheet steel with stiffening frame, complete with Ø 3mm leveroperated double bar locking system
• Rear panel manufactured from 10/10 sheet steel
• Removable roof manufactured from 10/10 sheet steel
• Bottom manufactured from 12/10 high-resistance sheet steel with adjustable cable entry (double cable entry for W=1000), complete with seal supplied separately

FLAT-PACK E NUX CABINET
(ASSEMBLY WITH 8 SCREWS ONLY)
• Composition to be assembled complying with customers requests
• Panels and doors are supplied together with two vertical uprights complete with accessories

PROTECTION RATINGS
• IP55 complying with IEC EN62208; EN60529
• NEMA 12 complying with UL508A; UL50
• Protection degree guaranteed by the two-component polyurethane foam seal
• Impact resistance IK10 complying with IEC EN62208; EN50102

(ENUX061804PR)

SKU ENUX061804PR
Brand ETA
Shipping Weight 60.0000kg
Shipping Width 0.600m
Shipping Height 1.800m
Shipping Length 0.180m
Shipping Cubic 0.194400m3

Be The First To Review This Product!

Help other Imensa Industrial Automation Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


You May Also Like



More From This Category